Fuji Electric
Fuji Electric 10 KVA Online UPS- Transformer Model
NPR 249,999NPR 326,00023% off
Finch PG is a double conversion online ups with a power factor 0.9 providing higher quality power density, delivering 12.5% more power when compared with conventional UPS (designed with power factor of 0.8). Finch PG is with DSP Technology and active input power factor correction design to ensure better output voltage conditions, power quality and power performance at all times. Its dual mains input will secure the power reliability in areas with poor power quality.
Product Description
Features and Benefits
- Online double conversion UPS.
- Input power factor corrector 0.99 (PFC)
- Automatic bypass, allow to transfer the load to the mains in case of overload or internal fault
- Inbuilt Isolation Transformer (optional) provides a galvanic isolation between the mains and the loads
- Hot standby Configuration to ensure the availability of Quality power to mission critical applications
- Battery cold start feature allows UPS to be powered on from the battery without utility
- Can be paralleled up to 3 Units for capacity and/ or redundancy
- Flexible or settable battery configuration
- Wide tolerance on the input voltage reduces switchovers to battery mode prolonging battery life.
- Green and energy saving: AC/AC efficiency up to 98% in ECO mode
Product Specifications
| Battery Numbers | 20 Nos (18-20 Adjustable) |
| Battery Type | SMF VRLA/ Vented Battery |
| Battery Typical Recharge Time | 9 Hours Recover to 90% Capacity |
| Capacity | 10 KVA- 9 KW |
| Configuration | Three Phase Input & Three Phase Output |
| Efficiency ( A C Mode) | 90.5% |
| Efficiency ( Eco Mode) | 96% |
| Height (mm) | 826 |
| Humidity | 0.95% RH @ 0-40 Degree Celsius (Non-Condensing) |
| Input- Frequency | 46 ~ 54 Hz or 56 ~ 64 Hz |
| Input- Phase | 3 Phases + Neutral + Ground |
| Input- Voltage | 190-520 VAC (3-phase at 50% load) | 305-478 VAC (3-phase at 100% load) |
| L C D Display | UPS Status, Load Level, Battery Level, Input/Output Voltage, Discharge Timer and Fault |
| Length (mm) | 592 |
| Maximum Battery Charging Current | 4A |
| Noise Condition | Less than 60dB @ 1 Meter |
| Output Current Crest Ration | 3:1 (max) |
| Output Frequency Range ( Batt) | 50 Hz +- 0.1 Hz or 60 Hz +- 0.1 Hz |
| Output Transfer Time | Zero |
| Output Voltage Regulation | +-1% |
| Output Waveform ( Batt. Mode) | Pure Sinewave |
| Output- Voltage | 400/415V (3ph+N) |
| Power Factor | >= 0.99 at 100% Load |
| Weight | 38 Kgs |
| Width (mm) | 250 |